BRQTT - GROUT COAT CC-40 PART A (GC-100)
- MSDS: BRQTT
- Manufacturer: AMERICAN ABRASIVE METALS CO
- Product Name: GROUT COAT CC-40 PART A (GC-100)
- National Stock Number: 8030-00N039486
Product Identification
Product ID:GROUT COAT CC-40 PART A (GC-100)
MSDS Date:01/28/1988
FSC:8030
NIIN:00N039486
Status Code:A
MSDS Number: BRQTT
Responsible Party
IRVINGTON, NJ 07111
US
Emergency Phone: 201-373-7060
Info Phone: 201-373-7060
Cage: 88444
Contractor
Telephone: 973-403-2600
Cage: 88444
Ingredients
PHENOL, NONYL-; (NONYL PHENOL)
CAS: 25154-52-3
RTECS: SM5600000
OSHA PEL NOT KNOWN
ACGIH TLV: NOT KNOWN
>56 G/KG.
OSHA PEL NOT KNOWN
ACGIH TLV: NOT KNOWN
Hazards
LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: BREATHING DIFFICULTIES,
IRRITATION. SKIN: IRRITATION, SENSITIZATION, DERMATITIS. EYES:
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN CONDITIONS, KIDNEY OR LIVER
DISEASE.
First Aid
First Aid:SKIN: WASH WITH SOAP & WATER FOR AT LEAST 15 MINUTES. INHAL:
REMOVE TO FRESH AIR. GIVE O*2 IF NEEDED. INGEST: GIVE LGE QTYS OF
WATER, INDUCE VOMITING. CALL MD. EYES: WASH W/LARGE QUANTITIES OF
WATER F OR AT LEAST 15 MINUTES. GET MED ATTN.
Fire Fighting
Flash Point Method:CC
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC.
Accidental Release
Spill Release Procedures:AVOID ALL PERSONAL CONTACT. TAKE UP WITH
ABSORBENT MATERIAL, SHOVEL INTO CLOSABLE CONTAINERS. FLUSH
CONTAMINATED AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY AREA IN CLSD
CNTNRS. CAUSES IRRIT. MAY CAUSE ALLERGIC SKIN RXN. AVOID CONT
W/EYES, SKIN/CLOTHING. AVOID BRTHG VAP, MIST/SPRAY.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC CHEMICAL CARTRIDGE
RESPIRATOR IF NEEDED.
Ventilation:GOOD LOCAL EXHAUST/GOOD MECHANICAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL SPLASH PROOF GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING.
Work Hygienic Practices:DO NOT SMOKE OR EAT WHILE HANDLING MATERIAL.
WASH AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<0.1
Spec Gravity:1.25 (H*2O=1)
Evaporation Rate & Reference:<1 (BUAC=1)
Solubility in Water:NIL
Appearance and Odor:VISCOUS LIQUID, MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS OR BASES.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:CO*2, CO & OTHER TOXIC FUMES.
Conditions to Avoid Polymerization:STRONG ACIDS OR BASES IN BULK.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.